Ceramic disks are sturdy however they can be fragile in some instances. One way ceramics shatter is when drawing a piping system for repairs, the air in the system can escape when the water is turned back on. To avoid destroying your ceramic-disk faucet, gradually turn the water back after the pipes are fixed. Prior to using the pipe in full capacity watch as the air gets pushed out continuously.
Ceramic-disk faucets are especially helpless against dregs gatherings. Therefore, don’t expect that a dripping faucet needs a total update. When a ceramic disk faucet builds up a consistent dribble, eliminate the aerator and move the handle through all positions a few times. On the off chance that was the culprit, this should clear it. When all is said in done, a ceramic-disk faucet is not a good choice if you experience sediment problems with your water, particularly in the event that they are extreme to such an extent that you require a filter.
However if you own a more current ceramic-disk faucet and you can’t clear the dregs by pivoting the handle, you’ll need to check the cartridge. Close off the water, tip back the handle, and take off the enriching cartridge cap.
Use a little flat blade screwdriver to eliminate the holding screws. At that point lift the cartridge from the faucet. In the event that you see dregs in the inlet ports, clear it out utilizing tweezers. You can likewise eliminate the neoprene seals to search for sediment. Clean them if you discover residue, yet on the off chance that you don’t track down any, the issue is likely in the cartridge. Most ceramic cartridges are not functional, so don’t sit around idly searching for parts, basically replace the cartridge, and reinstall the handle.